Nitrile (NBR)Air Inflated Square Bladder
- Application
- Industrial
- Material
- NBR,NR,Neoprene etc.
- Process
- Compression Moulding
₹1,600per piece · MOQ 10 Piece
Industry
Rubber components for chemical & process
Viton and PTFE-faced components for aggressive media, where an under-specified nitrile part fails in weeks and takes the plant down with it.
- Catalogued parts
- 20
- Compounds used
- 8
- Custom work
- To drawing or sample
What we typically supply into this sector
- PTFE-bonded dosing diaphragms
- Viton (FKM) O-rings and gaskets
- Chemical-duty valve plates
- Corrosion-resistant lined components
Compounds we use here
Nitrile (NBR)−30 °C to +110 °CThe workhorse oil-resistant elastomer. Excellent resistance to petroleum oils, hydraulic fluids, greases and diesel, with good abrasion and compression-set behaviour at a modest cost.EPDM−45 °C to +140 °CThe choice wherever water, steam, weather or ozone are involved. EPDM ages outdoors almost indefinitely and handles hot water and low-pressure steam that would destroy nitrile.Silicone (VMQ)−60 °C to +230 °CThe widest service temperature range of any common elastomer, plus physiological inertness. Used where parts must survive an oven cycle or stay flexible in deep cold.Viton (FKM)−20 °C to +230 °CThe premium fluoroelastomer for aggressive chemicals and sustained high heat. Specified where a nitrile part is failing early and downtime costs more than the seal.Neoprene (CR)−35 °C to +120 °CThe balanced all-rounder. Moderate oil resistance combined with genuine weather resistance and inherent flame retardance — no other single compound covers that spread as cheaply.Natural Rubber−50 °C to +80 °CUnmatched resilience, tear strength and dynamic fatigue life. Still the correct choice for shock and vibration work wherever oil is not present.PTFE / Teflon−200 °C to +260 °CNot an elastomer but a fluoropolymer, used as a bonded facing over a rubber backing. It gives a chemically inert working face while the rubber underneath supplies the flex.Polyurethane−30 °C to +80 °CExceptional abrasion resistance and load capacity — several times the wear life of conventional rubber on sliding or impact duty.
Catalogued components for chemical & process
Nitrile (NBR)
Nitrile (NBR)Dosing Pump Teflon Diaphragms
- Diaphragm Material
- NBR+PTFE
- Outer Diameter
- 125 mm
- Pump Type
- Diaphragm Pump
₹950per piece · MOQ 20 Piece
Nitrile (NBR)
Nitrile (NBR)Rubber and Cork Gaskets
- Material
- Rubber and Cork
- Application Type
- Industrial Machinery
- Shape
- Rectangular
₹200per piece · MOQ 20 Piece
Nitrile (NBR)Rubber O Ring
- Material
- Rubber
- Shape
- Round(O-Shape)
- Usage/Application
- Industrial
₹10per piece · MOQ 500 Piece
Nitrile (NBR)Pneumatic Rubber Bladder
- Application Ball
- Industrial
- Ball Size
- 300 x 300
- Bladder Material
- Rubber
₹12,000per piece · MOQ 5 Piece
Nitrile (NBR)Teflon Coated Rubber Diaphragm
- Material
- Neoprene
- Usage/Application
- Pumps
- Shape
- Round
₹850per piece · MOQ 10 Piece
Nitrile (NBR)Flexible Rubber Impeller
- Usage/Application
- Winery and Chemical Industries
- Color
- Black
- Impeller Diameter
- 50 mm to 190 mm
₹3,500per piece · MOQ 10 Piece
Nitrile (NBR)
Nitrile (NBR)Rubber Bonded Teflon Diaphragms
- Thickness
- 5 mm
- Inner Diameter
- solid
- Diameter
- 50 to 300 max dia
₹220 – ₹1,550per piece · 5 sizes · MOQ 50 Piece
PTFE / TeflonPtfe Teflon Diaphragms
- Application Type
- Chemical Industry
- Diameter
- 100 mm to 350 mm
- Shape
- Round
₹320 – ₹1,500per piece · 3 sizes · MOQ 20–50 Piece
Nitrile (NBR)Wine Pump Rubber Stators
- Color
- Black and White
- Shape
- Round
- Usage/Application
- Chemical, Winery Industries
₹14,300per piece · MOQ 5 Piece