Nitrile (NBR)Air Inflated Square Bladder
- Application
- Industrial
- Material
- NBR,NR,Neoprene etc.
- Process
- Compression Moulding
₹1,600per piece · MOQ 10 Piece
Industry
Rubber components for ropeways & material handling
Wear liners, sheave linings and bonded mounts for funicular ropeways and conveying plant — supplied to Suyog Gurbaxani Funicular Ropeways.
- Catalogued parts
- 9
- Compounds used
- 6
- Custom work
- To drawing or sample
What we typically supply into this sector
- Nitrile and natural rubber sheave liners
- Bonded ropeway mounts
- Impact and chute liners
- Drive and idler roller lagging
Compounds we use here
Nitrile (NBR)−30 °C to +110 °CThe workhorse oil-resistant elastomer. Excellent resistance to petroleum oils, hydraulic fluids, greases and diesel, with good abrasion and compression-set behaviour at a modest cost.EPDM−45 °C to +140 °CThe choice wherever water, steam, weather or ozone are involved. EPDM ages outdoors almost indefinitely and handles hot water and low-pressure steam that would destroy nitrile.Silicone (VMQ)−60 °C to +230 °CThe widest service temperature range of any common elastomer, plus physiological inertness. Used where parts must survive an oven cycle or stay flexible in deep cold.Neoprene (CR)−35 °C to +120 °CThe balanced all-rounder. Moderate oil resistance combined with genuine weather resistance and inherent flame retardance — no other single compound covers that spread as cheaply.Natural Rubber−50 °C to +80 °CUnmatched resilience, tear strength and dynamic fatigue life. Still the correct choice for shock and vibration work wherever oil is not present.PTFE / Teflon−200 °C to +260 °CNot an elastomer but a fluoropolymer, used as a bonded facing over a rubber backing. It gives a chemically inert working face while the rubber underneath supplies the flex.
Catalogued components for ropeways & material handling
Nitrile (NBR)
Nitrile (NBR)
Neoprene (CR)Anti Vibration Mount
- Mount Type
- Pad
- Load Capacity
- up to 2 tons
- Thread Size
- M12
₹1,800per piece · MOQ 50 Piece
Nitrile (NBR)Nitrile Rubber Liners
- Material
- Neoprene/Nitrile/Epdm Rubber
- Thickness
- 20/25/35mm
- Size
- 70Wx65Wx500L
₹1,400per piece · MOQ 50 Piece
Nitrile (NBR)Nitrile Rubber Roller
- Application
- Conveyor System
- Roller Diameter
- 100 mm
- Roller Length
- 300 mm
₹3,800per piece
Nitrile (NBR)Antivibration Rubber Mounts
- Mount Type
- Stud Mount
- Load Capacity
- 100 kg
- Thread Size
- M12
₹520per piece · MOQ 50 Piece
Nitrile (NBR)Industrial Grooved Rubber Coated Wheels
- Wheel Material
- Al bonded Rubber
- Shape
- Round
- Wheel Diameter
- 10 inch
₹15,500per piece · MOQ 10 Piece
Nitrile (NBR)Rubber Liners For Ropeway
₹3,500per piece
Neoprene (CR)