Natural RubberHeavy Duty Anti Vibration Mounts
- Mount Type
- Pad
- Load Capacity
- 1000 kg
- Thread Size
- M16
₹3,500per piece · MOQ 10 Piece
Industry
Rubber components for pumps & valves
Diaphragms, valve plates, impellers and seals for positive-displacement, dosing and submersible pumps — usually reverse-engineered from a failed part and improved on compound.
- Catalogued parts
- 31
- Compounds used
- 7
- Custom work
- To drawing or sample
What we typically supply into this sector
- Pump and dosing diaphragms in NBR, EPDM and PTFE-faced construction
- Flexible impellers for self-priming pumps
- Valve plates and seat seals
- Shaft and casing seals
Compounds we use here
Nitrile (NBR)−30 °C to +110 °CThe workhorse oil-resistant elastomer. Excellent resistance to petroleum oils, hydraulic fluids, greases and diesel, with good abrasion and compression-set behaviour at a modest cost.EPDM−45 °C to +140 °CThe choice wherever water, steam, weather or ozone are involved. EPDM ages outdoors almost indefinitely and handles hot water and low-pressure steam that would destroy nitrile.Silicone (VMQ)−60 °C to +230 °CThe widest service temperature range of any common elastomer, plus physiological inertness. Used where parts must survive an oven cycle or stay flexible in deep cold.Viton (FKM)−20 °C to +230 °CThe premium fluoroelastomer for aggressive chemicals and sustained high heat. Specified where a nitrile part is failing early and downtime costs more than the seal.Neoprene (CR)−35 °C to +120 °CThe balanced all-rounder. Moderate oil resistance combined with genuine weather resistance and inherent flame retardance — no other single compound covers that spread as cheaply.Natural Rubber−50 °C to +80 °CUnmatched resilience, tear strength and dynamic fatigue life. Still the correct choice for shock and vibration work wherever oil is not present.PTFE / Teflon−200 °C to +260 °CNot an elastomer but a fluoropolymer, used as a bonded facing over a rubber backing. It gives a chemically inert working face while the rubber underneath supplies the flex.
Catalogued components for pumps & valves
Natural Rubber
Neoprene (CR)Anti Vibration Mounts
- Mount Type
- Sandwich Mount
- Load Capacity
- 100 kg
- Body Material
- Neoprene
₹15 – ₹620per piece · 4 sizes · MOQ 100–1000 Piece
Nitrile (NBR)Dosing Pump Teflon Diaphragms
- Diaphragm Material
- NBR+PTFE
- Outer Diameter
- 125 mm
- Pump Type
- Diaphragm Pump
₹950per piece · MOQ 20 Piece
Nitrile (NBR)
Neoprene (CR)Anti Vibration Mount
- Mount Type
- Pad
- Load Capacity
- up to 2 tons
- Thread Size
- M12
₹1,800per piece · MOQ 50 Piece
Silicone (VMQ)Butterfly Valve Gasket
- Thickness
- 10 mm to 35 mm
- Material
- Silicone
- Usage/Application
- Industrial and Water
₹550per piece · MOQ 50 Piece
Nitrile (NBR)Rubber O Ring
- Material
- Rubber
- Shape
- Round(O-Shape)
- Usage/Application
- Industrial
₹10per piece · MOQ 500 Piece
Nitrile (NBR)Pneumatic Rubber Bladder
- Application Ball
- Industrial
- Ball Size
- 300 x 300
- Bladder Material
- Rubber
₹12,000per piece · MOQ 5 Piece
Nitrile (NBR)Teflon Coated Rubber Diaphragm
- Material
- Neoprene
- Usage/Application
- Pumps
- Shape
- Round
₹850per piece · MOQ 10 Piece
Nitrile (NBR)Winery Rubber Impellers
- Diameter
- 80 mm
- Usage/Application
- Industrial
- Closing Type
- Semiclosed
₹1,350per piece · MOQ 10 Piece
Nitrile (NBR)Rubber Winery Impellers
- Usage/Application
- Winery
- Color
- Black
- Impeller Diameter
- 50 mm to 190 mm
₹7,500per piece · MOQ 6 Piece
Nitrile (NBR)Flexible Rubber Impeller
- Usage/Application
- Winery and Chemical Industries
- Color
- Black
- Impeller Diameter
- 50 mm to 190 mm
₹3,500per piece · MOQ 10 Piece